Tank, approved for the storage of diesel and approved by the Ministry of the Interior in accordance with the Ministerial Decree D.M. 31.07.1934 and subsequent amendments to the D.M. 22.11.2017, through test certification no. 5127/4113 sub. 247 from 10.26.1998 and subsequent to 05.21.2009.
TFFBAC110 has a capacity from 490 to 9000 litres.
TECHNICAL DATA
MAIN FEATURES:
- Tank in first choice carbon steel in S235JR according to EN10025 / 93 Thickness 30/10, with horizontal cylindrical axis on feet.
- 400 mm diameter manhole with screws and gaskets;
- 3” lockable filling opening;
- 90% load limiting valve;
- Outlet with flame arrester 1 “1/2;
- Level indicator with mechanical clock.
- In the lower part of the tank there is a drain plug for scheduled periodic cleaning.
- Intake manifold is raised to allow for proper decantation of diesel and fitted with a check valve and filter.
- The tank is pre-treated with two coats of epoxy primer and then, after phosphating, it was painted with two coats of glossy two-component polyurethane finish, green RAL 6018
EQUIPMENT:
It is located in a metal cabinet, color orange RAL 2008, with a key lock, with a self-priming vane pump, capacity from 55 to 120 liters / min. with built-in by-pass, 220 V AC motor.
The system is also complete with: internal lighting, electrical panel, diesel fine adjustment, green light consumed in the presence of voltage, steady red light for diesel and system stop, emergency stop button, pump start / stop button, counter liters for private use with resettable partial count and continuous total count, line filter, 1” oil resistant rubber hose with automatic gun.
Protective roof (optional): complete with 4 vertical uprights and galvanized upper frame; galvanized corrugated iron, to protect the tank from the elements
BASIN:
Made of first choice carbon steel sheet S235JR according to EN 10025/93 with self-supporting round frame already pre-equipped and bolted on the bottom of the container. The tank is equipped with a ladder for inspection of the tank or similar system. Designed in proportion to the tank capacity, i.e. with 100% containment in the event of a spill, in compliance with the safety requirements of D.M. 22.11.2017.
It is equipped with: ground connection and outlet ball valve. The structure is coated with two coats of epoxy primer and subsequently, after phosphating, it was painted with two coats of two-component polyurethane top coat, glossy, green RAL 6018. The maintenance and operating instructions are included with the tank, as well as an approved certificate of conformity by the Ministry of the Interior and other certifications that comply with the applicable standards.